Drilling Jig MCQ Question And Answer | ITI FITTER 2 YEAR

ITI Fitter 2 YEAR Trade Drilling jig MCQ Question and Answer for CBT Online exam for NCVT AITT (All India Trade Test). Practice all FITTER Trade MCQ (Multiple choice Question). Also you can practice mock test exam online

Fitter 2 year Trade MCQ also useful for competitive exam like PSU Job exam As well as Government Job Exam, Apprentice job.

ITI Fitter 2 year | Drilling jig MCQ

PLEASE SELECT YOUR LANGUAGE FROM BELOW

English ગુજરાતી हिन्दी

1.
Which type of jig will not have base plate?

Table jig
Plate jig
Template jig
Sandwich jig

2.
What is the name of jig?

Leaf jig
Solid jig
Table jig
Angle plate jig

3.
What is the name of the limit gauge?

Box jig
Post jig
Turn over jig
Sandwich jig

4.
What is the name of clamp?

Strap clamp
Cam clamp
Latch clamp
Screw clamp

5.
What is the name of fixture?

Plate fixture
Angel plate fixture
Indexing plate fixture
Modified angle plate fixture

6.
Which type of bushes is used in jig to perform more than one operation in same location?

Slip bush
Plain bush
Fixed bush
Linear bush

7.
What is the purpose of grooves provided in the ‘V’ blocks?

Reduce the weight
Support the work piece
Accommodate the clamp
Allow thermal expansion

8.
Why the balancing weight is provided in the turning fixture?

To guide tool
To balance the tool
To balance worktable
To balance irregular workpiece

9.
Which type of fixture used for machining on evenly spaced surfaces?

Plate fixture
Vice jaw fixture
Indexing fixture
Angle plate fixture

10.
What is the name of jig?

Post jig
Solid jig
Channel jig
Trunnion jig

11.
Which is the important factor to determine the construction of fixture?

Machining method
Location and clamping
Tool guiding and frame
Size of work piece and tool

12.
What is the name of the limit gauge?

Position the balancing weight
Position the clamp and locators
Position the fixture on machine table
Position the fixture and work related to cutter

13.
Which type of jig is used awkwardly shaped work piece to drill different angles?

Post jig
Solid jig
Indexing jig
Trunnion jig

14.
Which device holds, supports, locates and also guide the cutting tool for operation?

Jig
Fixture
Chuck
Machine vice

15.
What is the name of clamp used in jig?

Tooth clamp
Latch clamp
Toggle clamp
Wedge clamp

16.
Why two or four hold down slots are provided in the base plate of milling fixture?

For rigid clamping
For guiding the tool
For locating workpiece
For adjusting the job setting

17.
What is the advantages of mass production?

Initial expenditure is low
Jigs and fixture are not needed
Cost and time reduced for manufacturing
Special purpose machines are not necessary

18.
What is the name of jig?

Box jig
Drill jig
Post jig
Leaf jig

19.
What is the method of lubrication?

Force feed
Gravity feed
Splash feed
Line feed

20.
Which bush is used to provide a hardened hole for renewable bushes?

Slip bush
Plain bush
Fixed bush
Linear bush

21.
What is the name of clamp?

Cam clamp
Screw clamp
Wedge clamp
Toggle clamp

22.
Which device is used to hold, locate and not guide the cutting tool during machining operation?

Jig
Fixture
‘C’ clamp
Machine vice

23.
What is the name of the limit gauge?

Turning fixture
Vice fixture
Milling fixture
Grinding fixture

24.
Which part restrict load of component in figure?

Clamp
Guide plate
Locating pin
Press fit bush

25.
What is the type of jig?

Post jig
Plate jig
Indexing jig
Angle plate jig

26.
Why the tenons provided at the bottom of base plate of milling fixture?

For guiding the tool
For clamping purpose
For balancing workpiece
For proper location of fixture

27.
What is the purpose of drill bushes provided in the drill jig?

To support base plate
To support drill plate
To locate and guide cutting tool
To restrict the movement of job

28.
What is the name of fixture?

Vice fixture
Solid fixture
Plate fixture
Indexing fixture

Please click Below Page Number for more MCQ

Drilling jig MCQ Question and Answer | ITI FITTER 2 YEAR

PLEASE SELECT YOUR LANGUAGE FROM BELOW

ITI Fitter 2 year | Drilling jig MCQ

PLEASE SELECT YOUR LANGUAGE FROM BELOW

1.
Which type of jig will not have base plate?

2.
What is the name of jig?

3.
What is the name of the limit gauge?

4.
What is the name of clamp?

5.
What is the name of fixture?

6.
Which type of bushes is used in jig to perform more than one operation in same location?

7.
What is the purpose of grooves provided in the ‘V’ blocks?

8.
Why the balancing weight is provided in the turning fixture?

9.
Which type of fixture used for machining on evenly spaced surfaces?

10.
What is the name of jig?

11.
Which is the important factor to determine the construction of fixture?

12.
What is the name of the limit gauge?

13.
Which type of jig is used awkwardly shaped work piece to drill different angles?

14.
Which device holds, supports, locates and also guide the cutting tool for operation?

15.
What is the name of clamp used in jig?

16.
Why two or four hold down slots are provided in the base plate of milling fixture?

17.
What is the advantages of mass production?

18.
What is the name of jig?

19.
What is the method of lubrication?

20.
Which bush is used to provide a hardened hole for renewable bushes?

21.
What is the name of clamp?

22.
Which device is used to hold, locate and not guide the cutting tool during machining operation?

23.
What is the name of the limit gauge?

24.
Which part restrict load of component in figure?

25.
What is the type of jig?

26.
Why the tenons provided at the bottom of base plate of milling fixture?

27.
What is the purpose of drill bushes provided in the drill jig?

28.
What is the name of fixture?

MORE MCQ

Erection and Testing MCQ Question and Answer | ITI FITTER 2 YEAR

Preventive maintenance MCQ Question and Answer | ITI FITTER 2 YEAR

Hydraulic and Pneumatics MCQ Question and Answer | ITI FITTER 2 YEAR

Repair techniques MCQ Question and Answer | ITI FITTER 2 YEAR

Pipe and Pipe fitting MCQ Question and Answer | ITI FITTER 2 YEAR

Advertisement

Leave A Reply Cancel reply

Drilling jig MCQ Question and Answer | ITI FITTER 2 YEAR

PLEASE SELECT YOUR LANGUAGE FROM BELOW

ITI Fitter 2 year | Drilling jig MCQ

PLEASE SELECT YOUR LANGUAGE FROM BELOW

1.Which type of jig will not have base plate?

2.What is the name of jig?

3.What is the name of the limit gauge?

4.What is the name of clamp?

5.What is the name of fixture?

6.Which type of bushes is used in jig to perform more than one operation in same location?

7.What is the purpose of grooves provided in the ‘V’ blocks?

8.Why the balancing weight is provided in the turning fixture?

9.Which type of fixture used for machining on evenly spaced surfaces?

10.What is the name of jig?

11.Which is the important factor to determine the construction of fixture?

12.What is the name of the limit gauge?

13.Which type of jig is used awkwardly shaped work piece to drill different angles?

14.Which device holds, supports, locates and also guide the cutting tool for operation?

15.What is the name of clamp used in jig?

16.Why two or four hold down slots are provided in the base plate of milling fixture?

17.What is the advantages of mass production?

18.What is the name of jig?

19.What is the method of lubrication?

20.Which bush is used to provide a hardened hole for renewable bushes?

21.What is the name of clamp?

22.Which device is used to hold, locate and not guide the cutting tool during machining operation?

23.What is the name of the limit gauge?

24.Which part restrict load of component in figure?

25.What is the type of jig?

26.Why the tenons provided at the bottom of base plate of milling fixture?

27.What is the purpose of drill bushes provided in the drill jig?

28.What is the name of fixture?

MORE MCQ

Erection and Testing MCQ Question and Answer | ITI FITTER 2 YEAR

Preventive maintenance MCQ Question and Answer | ITI FITTER 2 YEAR

Hydraulic and Pneumatics MCQ Question and Answer | ITI FITTER 2 YEAR

Repair techniques MCQ Question and Answer | ITI FITTER 2 YEAR

Pipe and Pipe fitting MCQ Question and Answer | ITI FITTER 2 YEAR

Advertisement

Leave A Reply Cancel reply

1.
Which type of jig will not have base plate?

2.
What is the name of jig?

3.
What is the name of the limit gauge?

4.
What is the name of clamp?

5.
What is the name of fixture?

6.
Which type of bushes is used in jig to perform more than one operation in same location?

7.
What is the purpose of grooves provided in the ‘V’ blocks?

8.
Why the balancing weight is provided in the turning fixture?

9.
Which type of fixture used for machining on evenly spaced surfaces?

10.
What is the name of jig?

11.
Which is the important factor to determine the construction of fixture?

12.
What is the name of the limit gauge?

13.
Which type of jig is used awkwardly shaped work piece to drill different angles?

14.
Which device holds, supports, locates and also guide the cutting tool for operation?

15.
What is the name of clamp used in jig?

16.
Why two or four hold down slots are provided in the base plate of milling fixture?

17.
What is the advantages of mass production?

18.
What is the name of jig?

19.
What is the method of lubrication?

20.
Which bush is used to provide a hardened hole for renewable bushes?

21.
What is the name of clamp?

22.
Which device is used to hold, locate and not guide the cutting tool during machining operation?

23.
What is the name of the limit gauge?

24.
Which part restrict load of component in figure?

25.
What is the type of jig?

26.
Why the tenons provided at the bottom of base plate of milling fixture?

27.
What is the purpose of drill bushes provided in the drill jig?

28.
What is the name of fixture?