Measuring And Marking MCQ Question and Answer | ITI Mechanic Diesel

ITI Mechanic Diesel Trade Measuring And Marking MCQ Question and Answer for CBT Online exam for NCVT AITT (All India Trade Test).  Practice all Mechanic Diesel Trade MCQ (Multiple choice Question). Also you can practice mock test exam online

Mechanic Diesel Trade MCQ also useful for competitive exam like PSU Job exam As well as Government Job Exam, Apprentice job.

ITI Mechanic Diesel | Measuring And Marking MCQ

1.

What is the name of part marked as “X”?

1. Beam
2. Fixed jaw
3. Vernier scale
4. Depth measuring blade

2.

What is the name of the part marked as ‘X’?

1. Cap
2. Lock
3. Stock
4. Graduated sleeve

3.

What is the least count of the metric outside micrometer?

1. 0.01 mm
2. 0.10 mm
3. 0.0001 mm
4. 0.00001 mm

4.

Which part ensures uniform pressure on the measuring faces in the outside micrometer?

1. Barrel
2. Spindle
3. Thimble
4. Ratchet Slop

5.

Which is the fixed measuring face of micrometer?

1. Anvil
2. Barrel
3. Spindle
4. Thimble

6.

Which instrument is used to measure the diameter of cam shaft journals?

1. Depth micrometer
2. Three-point internal micrometer
3. Inside micrometer
4. Outside micrometer

7.

Which material used in the outside micometer anvil?

1. Brass
2. Bronze
3. Carbon
4. Carbide

8.

What is the name of the part marked as ‘X’?

1. Anvil
2. Frame
3. Spindle
4. Thimble

9.

What is the name of the part marked as ‘X’?

1. Anvil
2. Frame
3. Spindle
4. Thimble

10.

How many equal thimble divisions are made in outside micrometer?

1. 30 Divisions
2. 40 Divisions
3. 50 Divisions
4. 60 Divisions

11.

Wht is the value of one thimble division reading in outside micrometer?

1. 0.05 mm
2. 0.01 mm
3. 0.02 mm
4. 0.03 mm

12.

What is the name of the measuring instrument?

1. Depth gauge
2. Bore dial gauge
3. Telescopic gauge
4. Vernier gauge

13.

What is the name of the part marked as ‘X’?

1. Spindle
2. Plunger
3. Centring shoes
4. Fixed anvil insert

14.

What is the name of the part marked as ‘X’?

1. Spindle
2. Plunger
3. Fixed Anvil Insert
4. Centering shoes

15.

What is the name of the part marked as ‘X’?

1. Stem
2. Plunger
3. Fixed Anvil Insert
4. Centering shoes

16.

Which part actuates the movement of the dial for reading measurement of dial bore gauge?

1. Stem
2. Plunger
3. Fixed anvil
4. Centring shoe

17.

Which instrument used to read the telescopic gauge measurement?

1. Depth micrometer
2. Inside micromete
3. Outside micrometer
4. Three point internal micrometer

18.

What is the name of the part marked as ‘X’?

1. Anvil
2. Stem
3. Plunger
4. Pointer

19.

Name the part marked as ‘X’

1. Anvil
2. Clamp
3. Plunger
4. Stem

20.

Which instrument is used to check the end-play of crank shaft?

1. Dial test indicator
2. Telescopic gauge
3. Bore dial gauge
4. Slip gauge

21.

What is the name of the gauge?

1. Feeler gauge
2. Snap gauge
3. Telescopic gauge
4. Plug gauge

22.

Which can be measured by feeler gauge?

1. Radius
2. Screw pitch
3. Surface roughness
4. Gap between mating parts

23.

Which marking media is used on the rough surfaces?

1. White wash
2. Prussian blue
3. Copper Sulphate
4. Cellulose lacquer

24.

Which marking media used to mark in the finished surfaces?

1. White wash
2. Prussian blue
3. Copper Sulphate
4. Cellulose lacquer

25.

Which marking media is poisonous?

1. White wash
2. Prussian blue
3. Copper sulphate
4. Cellulose lacquer

26.

What is the name of equipment?

1. Surface plate
2. Angle plate
3. ‘V’ Block
4. Parallel Block

27.

What is the basic unit of length as per SI unit?

1. Mm
2. Cm
3. Meter
4. Km

28.

What is the least count of engineer steel rule?

1. 1 mm
2. 0.5 mm
3. 2 mm
4. 3 mm

29.

Which marking device used to scribe circle?

1. Jenny caliper
2. Inside caliper
3. Spring divider
4. Out side caliper

30.

Which instrument is used to check the right angle?

1. Steel rule
2. Try square
3. Firm joint caliper
4. Spring Joint caliper

31.

What is the use of outside calliper?

1. Check the flatness
2. Check the angle
3. Check the internal dia of the job
4. Check the external dia of the job

32.

What is the name of the calliper?

1. Inside caliper
2. Outside calipe
3. Firm joint caliper
4. Spring joint outside calipe

33.

What is the name of calliper?

1. Firm joint caliper
2. Spring joint caliper
3. Inside caliper
4. Jenny caliper

34.

Name the part marked as ‘X’

1. Snug
2. Spindle
3. Guide pin
4. Rocker arm

35.

Name the part marked ‘X’ in universal surface gauge?

1. Snug
2. Scribe
3. Rocker arm
4. Vee groove

36.

What is the point angle of centre punch?

1. 30°
2. 45°
3. 60°
4. 90°

37.

What is the angle of prick punch?

1. 60°
2. 90°
3. 120°
4. 180°

38.

What is the name of the chisel?

1. Flat chisel
2. Cross cut chisel
3. Half round nose chisel
4. Diamond point chisel

39.

What is the name of the chisel?

1. Flat chisel
2. Cross cut chisel
3. Half round nose chisel
4. Diamond point chisel

40.

What is the name of the chisel?

1. Flat chisel
2. Cross cut chisel
3. Half round nose chise
4. Diamond point chisel

41.

What is the name of part marked as ‘X’?

1. Face
2. Pein
3. Cheek
4. Eye hole

42.

What is the name of the hammer part marked as ‘X’?

1. Cheek
2. Wedge
3. Face
4. Eye hole

43.

What is the name of the device?

1. Pipe vice
2. Hand vice
3. Pin vice
4. Bench vice

44.

What is the name of the vice?

1. Pipe vice
2. Hand vice
3. Tool maker vice
4. Bench vice

45.

What is the name of the plier?

1. Slip-joint plier
2. End cutting plier
3. Flat nose plier
4. Side cutting plier

46.

What is the name of the tool?

1. Jack
2. Puller
3. Wrench
4. Extractor

47.

What is the working media of pneumatic tool?

1. Oil
2. Air
3. Water
4. Kerosene

48.

What is the name of the screw driver?

1. Recess screw driver
2. Ratchet screw driver
3. Stumpy screw driver
4. Offset screw driver

49.

What is the material used to make Allen keys?

1. Cast iron
2. Aluminium alloy
3. High speed steel
4. Chrome vanadium steel

50.

What is the use of a bench vice?

1. To hold a work piece
2. To hold a tool
3. To hold a work table
4. To hold a chuck

51.

What is the name of the spanner?

1. Open spanner
2. Tubular spanner
3. Socket spanner
4. Ring spanner

52.

What is the name of the spanner?

1. Socket spanner
2. Tubular spanner
3. Hook spanner
4. Adjustable spanner

53.

Calculate the value of 1 vernier scale in the figure.

1. 0.06 Units
2. 0.07 Units
3. 0.08 Units
4. 0.09 Units

54.

What is the name of the part marked as ‘X’ in vernier caliper?

1. Beam
2. Lock screw
3. Sliding unit
4. Movable jaw

55.

What is the least count of vernier caliper in metric system?

1. 0.1 mm
2. 0.01 mm
3. 0.02 mm
4. 0.001 mm

56.

Which measuring instrument used to measuring inside, outside and depth of work piece?

1. Steel rule
2. Micrometer
3. Dial caliper
4. Vernier caliper

57.

Which part of vernier caliper used to measure internal and external measurement?

1. Beam
2. Sliding unit
3. Fixed jaw
4. Movable jaw

58.

What is the reading of vernier caliper with the least count of 0.1 mm?

1. 44.8 mm
2. 44.4 mm
3. 44.6 mm
4. 45.2 mm

59.

What is the reading of vernier caliper with the least count of 0.1 mm?

1. 0.03 mm
2. 0.3 mm
3. 0.003 mm
4. 1.03 mm

60.

Name the part marked ‘X’ in vernier calliper.

1. 54
2. 54.2
3. 54.4
4. 55.4

61.

What is the smallest possible measurement that can be taken with the depth micrometer?

1. 0.01 mm
2. 0.02 mm
3. 0.001 mm
4. 0.002 mm

62.

What is the measuring instrument used to measure diameter of a piston pin?

1. Depth micrometer
2. Inside micrometer
3. Outside micrometer
4. 3 point internal micrometer

63.

What is the reading of the outside micrometer?

1. 8.20 mm
2. 8.59 mm
3. 8.69 mm
4. 8.44 mm

64.

What is the reading of the out side micrometer (0-25 mm)?

1. 2.25
2. 2.5
3. 2.75
4. 20.75

65.

Which instrument used to check inside size of slots?

1. Vernier caliper
2. Outside micrometer
3. Inside micrometer
4. Telescopic gauge

66.

What is to be checked with vaccum gauge?

1. Leak in the cooling system
2. Leak in the air brake system
3. Leak in the inlet- manifold system
4. Leak in the hydraulic brake system

67.

What is the Purpose of chisel?

1. Grinding
2. Machining
3. Reaming
4. Chipping

68.

Which chisel is used to remove metal from large flat surface?

1. Flat chisel
2. Cross cut chisel
3. Half round nose chisel
4. Diamond point chisel

69.

Which type of chisel used for squaring material at the corners?

1. Flat chisel
2. Half round chisel
3. Cross cut chisel
4. Diamond point chisel

70.

What is the purpose of the eye hole in an hammer?

1. Strike the job
2. Fix the handle
3. Reduce the weight
4. Stamp the details

71.

What is the use of lump hammer?

1. Strike the metal
2. Punch the metal
3. Spread the metal
4. Light demolition work

72.

What is the purpose of mallets?

1. Riveting operation
2. Strike on soft metal
3. Strike on hard metal
4. Spread the metal to all sides

73.

Which screw driver is used in the space limitation?

1. Cross-recers screw driver
2. Ratchet screw driver
3. Stumpy screw driver
4. Offset screw driver

74.

Which vice is used to hold a very small diameter job?

1. Pipe vice
2. Hand vice
3. Pin vice
4. Tool maker’s vice

75.

Which condition the tyre pressure not to be checked?

1. Tyre is cold
2. Tyre is carrying load
3. Before start of journey
4. Tyre is hot after long run